Mercedes-Benz Kit4 C7 (Xentry VCI + Tablet )
Official Brand New XENTRY Diagnosis KIT4 for Mercedes-Benz
The new VCI multiplexer (vehicle interface) XENTRY Diagnosis VCI Kit4 uses an interface for diagnostics and repair, as well as programming electronic control units for Mercedes.
Diagnostics XENTRY VCI does not have its own PC core, battery, fan or display. It is controlled via the XENTRY Diagnostic Panel via WLAN or via a USB cable, which we can also provide
Convenient Xentry VCI Multiplexer with a small, rugged design (no PC core, battery, fan or display)
Firmware updates required in rare cases.
It can be used for all models.
No power supply required for external power supply.
How to confirm or Register with the Xentry Daimler online SCN: Click Here>>> 2_A quick_guide_identification_for_xentry_flash_users_enu_1_de
XENTRY Diagnosis Kit 4 now offers many more advantages in comparison to XENTRY Diagnosis Kit 3.
Easier to use
The display is a 13.3 inch, multitouch, full HD display with a brightness of 400 nits.XENTRY Diagnosis Pad 2 comes with four USB type A 3.0 ports and one USB type C portLocated on the front side are two buttons that you can configure individually using ConfigAssistTo provide a more stable WiFi connection to XENTRY Diagnosis VCI, a second WiFi card has been installed, the WiFi stick in the XENTRY Diagnosis Pad 2 has been discontinued.
XENTRY Diagnosis Pad 2 comes with the latest Intel® CoreTM i5 processor (1.6 GHz, turbo up to 3.9 GHz)The main memory has 16 GB DDR41 TB SSD hard drive (with 3000 MB/s read and write speed)
The connection to XENTRY Diagnosis VCI is made using a permanently installed WLAN card.XENTRY Diagnosis Pad 2 is passively cooled and therefore it does not have a fan.XENTRY Diagnosis Pad 2 can be run on battery power for up to 8 hours.
It supports full range of diagnostics functions, wiring diagrams and offline W223 W206 diagnosis.
|Operating system||Windows 10 IoT LTSC Enterprise|
|Processor||Intel® CoreTM i5|
|Main memory||16 GB DDR4|
|Hard drive||1 TB SSD|
|Display||13.3″, full HD multitouch, brightness 400 nits, resolution 1920 x 1080, antiglare|
|Dimension||Wait approx. 338 x 240 x 33 mm (W x L x H)|
The VCI used so successfully before in XENTRY Diagnosis Kit 3 is also part of the scope of supply for XENTRY Diagnosis Kit 4.
The practical multiplexer in a compact and sturdy design (no PC core, battery, fan, or display)
No more diagnosis updates required – only firmware updates on rare occasions
Can be used for all model series
Does not require an adapter for an external power supply
|Network Cable||USB 2.0|
|Microprocessor||Intel MX6 Solo|
|RAM||512 MB DDR3|
|LEDs||5 status LEDs|
|Power supply||8 V to 28 V|
From the vehicle battery via the diagnosis connection cableor via a connected USB cable
*Important: The contact socket in the vehicle must be protected with a fuse with a maximum rating of 6 A/32 V.
|Certifications VCI||FCC, CE, RoHS|