Description

Original Mercedes Benz Xentry C6 VCI Only Diagnostics Multiplexer with Update version 2024.01

Mercedes Benz Xentry VCI Diagnostics  C6 Only Multiplexer with  Software Version: 2024.01 update For All MERCEDES BENZ SUPPER Cars, Vehicles, Heavy Trucks…etc

Description

Genuine Mercedes Benz Xentry VCI Diagnose Tools

Original available in original generation of dealer diagnostic scanners for Mercedes cars. The device was developed by Bosch. Mercedes Benz Xentry Diagnosis VCI Multiplexer supports a full range of service functions such as reading and deleting trouble codes , activations, performer tests, programming and coding, full system support. Mercedes XENTRY VCI Come in a compact rubberized case, does not have batteries, fans and display on board. An external power supply is not required, power supply is made from a diagnosed vehicle.

This is Original Bosch Mercedes Xentry the VCI:

Xentry Diagnosis VCI Mercedes
Original
Firmware upgraded to version: 01/2024  little Bu. ( State: Brand New)
Included is a compatible USB-WIFI ] Adapter and an OBD cable.
Works great with Xentry Diagnosis Open Shell

Note: A software Download Link will be available after purchase.

What are the prospects for Bosch Xentry Connect and Xentry Diagnosis VCI : 

The  NEW Xentry Diagnosis VCI is fundamentally different for the better from its predecessor :

easy and convenient, without built-in PCs and hard drives inside, no fans, battery and display

Please Note: You do not need to constantly update the internal firmware, no external power required

Specification :

Mercedes Benz Xentry Diagnosis VCI Specifications:
Clock rate 800MHz
RAM 512 MB DDR3 RAM
ROM 512 MB
Flash MASS STORAGE (opt) USB Memory Stick
User interface
LEDS 5 status LEDs
Acoustic signal beeper

Power supply: From the vehicle battery via the diagnosis connection cable
or via a connected USB cable 8V to 28V

Important:

Diagnostic socket of a vehicle must be secured
with a fuse of maximum 6A/ 32V.

Mechanical Properties:

Dimension 168x115x45 mm
weight 2.1 kg
Power supply 750 mA
Imput voltage (fail-safe) 8to 28 VDC
Operating Temperature -40 CO -+80 CO
Storage Temperature -40 CO -+80 CO
Humidity at 25 CO 30 % – 95 %
Makimum operating height 4000m
Protection class, diagnosis connection cable not plugged in IP 30
Protection class, diagnosis connection cable plugged in IP54
Diagnosis connection cable
J1962 (ISO 15031-3) 26 pins

Software Update Version.: 2024.01 

Certification: VCI, FCC, CE

Name *

First

Last

Email *

WahtsApp Number *

Subject *

Comments *

Submit your request so we will contact you same day* Please keep in mind that all comments are moderated according to our privacy policy.

Allow *

• Check Choice

A form will not submit unless all required fields are provided. We're glad you have chosen to leave a comment.

Submit

29503

XENTRY Portal

https://xentry.daimler.com/information/public/content/display/vertrieb_1tr9vurhlttjb

UMAS FAQs for Users

Change in UMAS.local_Ident process if your market uses this

If your market uses the manual identification process, the procedure in GEMS is changing from July 21. You will no longer have an option to set the UMAS.Local_Ident role. In future, you will be able to set the “Identified” status directly in the ‘User overview’ view. To set this status, search for the user in GEMS, then click on Overview. In this view, you can change the status directly after the manual identification process.

Independent workshops and Mercedes-Benz dealers from Germany, Mercedes-Benz national organizations worldwide and internal departments can purchase diagnosis hardware and software from this Shop area once it has been checked that their organization is authorized to purchase the products

identificationsprocess_idnow_de

Successful identification is mandatory for all GEMS Admins for the GEMS login

As announced in our previous Market Information Bulletin about “MFA for GEMS Admins and further security functions” for GEMS, it will be necessary for every Admin to identify themselves to be able to use GEMS from July 21 onwards. If you have not yet identified yourself, you can start the automatic process through the UMAS or you can use the manual process in your market.
Instructions for the identification process for all GEMS Org Admins:

German

Instructions:

Registration & applying for authorization to order products and user administration