Description

Scanner 1.4.0 for BMW – diagnosis speedometer adjustment

With the scanner for BMW, you have the option of reading out and deleting the error memory and carrying out coding such as TV-Free..

Here in the latest version 1.4 and including the necessary software!

Functions

Read/delete manufacturer-specific error codes
Read/write from EEPROM
Read/write from flash memory
Transfer configuration to control units, e.g. when replacing the control unit
Adaptation of the chassis number and mileage, e.g. for used control units
Coding of the light control
module Service interval and carry out a service reset
· TV activation possible
· and much more

Our device is suitable for the following BMW vehicles:

BMW 3 Series E46
BMW 5 Series E39
BMW 7 Series E38
BMW X3 E83
BMW X5 E53
BMW Z4 E85

Supported control units:

DME – Digital Motor Electronics E38/E39/E46/E53/E83/85
EGS – Electronics gearbox control E38/E39/E46/E53/E83/85
EWS – Electronics car immobilisation system E38/E39/E46/E53/E83/85
ABS – Antilock Braking System with ASC/DSC E38/E39/E46/E53/E83/85
EHC – Electronic Height Control E38/E39/E46/E53/E83/85
A/C – E38/E39/E46/E53/E83/ 85
FGB – Rear Compartment Blower E38/E39/E46/E53/E83/85
SRS – Supplemental Restraint System E38/E39/E46/E53/E83/85
IKE – Instrument Cluster Electronics E38/E39/E46/E53/E83/85
LCM – Light Check Modules E38/E39/E46/E53/E83/85
GR2 – Cruise Control E38/E39/E46/E53/E83/85
PDC – Park Distance Control E38/E39/E46/E53/E83/85
AIC – Automatic Interval Control E38/E39/E46/E53/E83/85
RAD – Radio E38/E39/E46/E53/E83/85
SZM – Switching Centre, Center Console E38/E39/E46/E53/E83/85
NAV – Navigation System E38/E39/E46/E53/E83/85
MID – Multi Info Display E38/E39/E46/E53/E83/85
ZKE – Central Body Electronics E38/E39/E46/E53/E83/85
SMB – Passenger Seat Memory E38/E39/E46/E53/E83/85
LSM – Seat/Steering Wheel Memory E38/E39/E46/E53/E83/85
EDC – Electronic Damper Control E38/E39/E46/E53/E83/85
LEW – Steering Angle Sensor E38/E39/E46/E53/E83/85
RDC – Tire Pressure Check E38/E39/E46/E53/E83/85
MFL – Multi Function Steering Wheel E38/E39/E46/E53/E83/85
DSP – Digital Sound Processor E38 /E39/E46/E53/E83/85
BMBT – On Board Monitor, control panel E38/E39/E46/E53/E83/85
VID – Video Mdule E38/E39/E46/E53/E83/85
SES – Language Input System E38/E39/E46/E53/E83/85
Tel – Car Telephone E38/E39/E46/E53/E83/85
HKM – Boot lid Module E38/E39/E46/E53/E83/85
LRA – Automatic Headlight Vertical Aim Control E38/E39/E46/E53/E83/85
FID – Multi Info Display Rear E38/E39/E46/E53/E83/85
NAJ – Japanese Navigation System E38/E39/E46/E53/E83/85

The respective options depend on the vehicle and the installed control units.
A suitable 20 pin OBD1 adapter for older vehicles without an OBDII interface can be found in our shop.
Alternatively, you can find the whole thing as a set in our shop.

Our diagnostic device is made of high-quality components and has a fully equipped circuit board, so a secure and stable connection to the vehicle is guaranteed.

INFO

This is not an original BMW product, the scanner is only compatible with the vehicles mentioned above.

This scanner can only be used on Windows 32-bit systems.

Installation note:

BMW Scan 1.4.0 requires a Windows 32-bit system (Windows XP, Vista or 7).

Installation steps:

1. Install the supplied software
2. After the installation, connect the dongle to the PC and install the drivers.
3. Connect the dongle to the vehicle and start the program.
4. The program registers the dongle and you can now use BMW Scan 1.4.0.